Posted by: CS | May, 2009

Spot Removal Tips – Shoe Polish

Follow these steps in order to remove the Shoe Polish spill:

  • In order to prevent the spill from becoming a permanent stain, Act Quickly.
  • Blot any liquids with a clean white towel.  Scrape any solids with a dull spoon.
  • Do Not scrub the carpet.  This may cause damage to the carpet fibers.
  • Pretest any spot removal agent in an inconspicuous area for color transfer or damage.  If color transfer or damage is present, don’t use that solution.
  • Never use any product which contains bleach.
  • Never use any of the spot removal agents in concentrations stronger than those recommended.
  • When using lacquer thinner, nail polish remover, or a dry cleaning solvent, never apply directly to the carpet.  Apply it to a white towel and then blot it on the spill.  Use caution when using these products, and follow the manufacturer instructions.

Steps

Shoe Polish

  1. Remove excess
  2. Apply dry cleaning solvent to a white towel, and then blot on spot
  3. Blot clean with white towel or non printed-paper towel and warm water
  4. Mix 1/4 tsp mild (non bleach containing) detergent to one cup of warm water
  5. Apply to spot, rub gently in one direction at a time using white terry towel, or non printed-paper towel
  6. Blot clean with white towel and warm water
Posted by: CS | May, 2009

Spot Removal Tips – Tea

Follow these steps in order to remove the Tea spill:

  • In order to prevent the spill from becoming a permanent stain, Act Quickly.
  • Blot any liquids with a clean white towel.  Scrape any solids with a dull spoon.
  • Do Not scrub the carpet.  This may cause damage to the carpet fibers.
  • Pretest any spot removal agent in an inconspicuous area for color transfer or damage.  If color transfer or damage is present, don’t use that solution.
  • Never use any product which contains bleach.
  • Never use any of the spot removal agents in concentrations stronger than those recommended.
  • When using lacquer thinner, nail polish remover, or a dry cleaning solvent, never apply directly to the carpet.  Apply it to a white towel and then blot it on the spill.  Use caution when using these products, and follow the manufacturer instructions.

Steps

Tea

  1. Blot with white towel or non printed-paper towel to remove excess
  2. Mix 1/4-teaspoon mild (non bleach containing) detergent to one cup of warm water
  3. Apply to spot, rub gently in one direction at a time using white terry towel, or non printed-paper towel
  4. Blot clean with white towel or non printed-paper towel and warm water
  5. Repeat steps 2-4 no more than 3 times as necessary
  6. Mix 1/4 cup white vinegar with 1/2 cup cold water and apply to spot
  7. Blot dry with white towel
Posted by: CS | May, 2009

Spot Removal Tips – Toothpaste

Follow these steps in order to remove the Toothpaste spill:

  • In order to prevent the spill from becoming a permanent stain, Act Quickly.
  • Blot any liquids with a clean white towel.  Scrape any solids with a dull spoon.
  • Do Not scrub the carpet.  This may cause damage to the carpet fibers.
  • Pretest any spot removal agent in an inconspicuous area for color transfer or damage.  If color transfer or damage is present, don’t use that solution.
  • Never use any product which contains bleach.
  • Never use any of the spot removal agents in concentrations stronger than those recommended.
  • When using lacquer thinner, nail polish remover, or a dry cleaning solvent, never apply directly to the carpet.  Apply it to a white towel and then blot it on the spill.  Use caution when using these products, and follow the manufacturer instructions.

Steps

Toothpaste

  1. Remove excess
  2. Mix 1/4-teaspoon mild (non bleach containing) detergent to one cup of warm water
  3. Apply to spot, rub gently in one direction at a time using white terry towel, or non printed-paper towel
  4. Blot clean with white towel or non printed-paper towel and warm water
  5. Mix 1/4 cup white vinegar with 1/2 cup cold water and apply to spot
  6. Blot dry with white towel
  7. Mix 1 tablespoon of ammonia with cool water apply to spot
  8. Blot dry with white towel
Posted by: CS | May, 2009

Spot Removal Tips – Vomit

Follow these steps in order to remove the Vomit spill:

  • In order to prevent the spill from becoming a permanent stain, Act Quickly.
  • Blot any liquids with a clean white towel.  Scrape any solids with a dull spoon.
  • Do Not scrub the carpet.  This may cause damage to the carpet fibers.
  • Pretest any spot removal agent in an inconspicuous area for color transfer or damage.  If color transfer or damage is present, don’t use that solution.
  • Never use any product which contains bleach.
  • Never use any of the spot removal agents in concentrations stronger than those recommended.
  • When using lacquer thinner, nail polish remover, or a dry cleaning solvent, never apply directly to the carpet.  Apply it to a white towel and then blot it on the spill.  Use caution when using these products, and follow the manufacturer instructions.

Steps

Vomit

  1. Remove excess
  2. Mix 1/4-teaspoon mild (non bleach containing) detergent to one cup of warm water
  3. Apply to spot, rub gently in one direction at a time using white terry towel, or non printed-paper towel
  4. Blot clean with white towel or non printed-paper towel and warm water
  5. Mix 1/4 cup white vinegar with 1/2 cup cold water and apply to sop
  6. Blot dry with white towel
  7. Mix 1 tablespoon of ammonia with cool water apply to spot
  8. Blot dry with white towel
Posted by: CS | May, 2009

Spot Removal Tips – Wax

Follow these steps in order to remove the Wax spill:

  • In order to prevent the spill from becoming a permanent stain, Act Quickly.
  • Blot any liquids with a clean white towel.  Scrape any solids with a dull spoon.
  • Do Not scrub the carpet.  This may cause damage to the carpet fibers.
  • Pretest any spot removal agent in an inconspicuous area for color transfer or damage.  If color transfer or damage is present, don’t use that solution.
  • Never use any product which contains bleach.
  • Never use any of the spot removal agents in concentrations stronger than those recommended.
  • When using lacquer thinner, nail polish remover, or a dry cleaning solvent, never apply directly to the carpet.  Apply it to a white towel and then blot it on the spill.  Use caution when using these products, and follow the manufacturer instructions.

Steps

Wax

  1. Scrape with dull spoon to remove as much as possible
  2. Apply dry cleaning solvent to a white towel, and then blot on spot
  3. Mix 1/4-teaspoon mild (non bleach containing) detergent to one cup of warm water
  4. Apply to spot, rub gently in one direction at a time using white terry towel, or non printed-paper towel
  5. Blot clean with white towel or non printed-paper towel and warm water
  6. Mix 1/4 cup white vinegar with 1/2 cup cold water and apply to spot

Blot dry with white towel

Posted by: CS | May, 2009

Spot Removal Tips -Beer

Follow these steps in order to remove the Beer spill:

  • In order to prevent the spill from becoming a permanent stain, Act Quickly.
  • Blot any liquids with a clean white towel.  Scrape any solids with a dull spoon.
  • Do Not scrub the carpet.  This may cause damage to the carpet fibers.
  • Pretest any spot removal agent in an inconspicuous area for color transfer or damage.  If color transfer or damage is present, don’t use that solution.
  • Never use any product which contains bleach.
  • Never use any of the spot removal agents in concentrations stronger than those recommended.
  • When using lacquer thinner, nail polish remover, or a dry cleaning solvent, never apply directly to the carpet.  Apply it to a white towel and then blot it on the spill.  Use caution when using these products, and follow the manufacturer instructions.

Steps

Beer

  1. Blot with white towel or non printed-paper towel to remove excess
  2. Mix 1/4-teaspoon mild (non bleach containing) detergent to one cup of warm water
  3. Apply to spot, rub gently in one direction at a time using white terry towel, or non printed-paper towel
  4. Blot clean with white towel or non printed-paper towel and warm water
  5. Repeat steps 2-4 no more than 3 times as necessary
  6. Mix 1/4 cup white vinegar with 1/2 cup cold water and apply to spot
  7. Blot dry with white towel
Posted by: CS | May, 2009

Spot Removal Tips -Broth Soup

Follow these steps in order to remove the Broth Soup spill:

  • In order to prevent the spill from becoming a permanent stain, Act Quickly.
  • Blot any liquids with a clean white towel.  Scrape any solids with a dull spoon.
  • Do Not scrub the carpet.  This may cause damage to the carpet fibers.
  • Pretest any spot removal agent in an inconspicuous area for color transfer or damage.  If color transfer or damage is present, don’t use that solution.
  • Never use any product which contains bleach.
  • Never use any of the spot removal agents in concentrations stronger than those recommended.
  • When using lacquer thinner, nail polish remover, or a dry cleaning solvent, never apply directly to the carpet.  Apply it to a white towel and then blot it on the spill.  Use caution when using these products, and follow the manufacturer instructions.

Steps

Broth Soup

  1. Blot with white towel or non printed-paper towel to remove excess
  2. Apply dry cleaning solvent to a white towel, and then blot on spot
  3. Blot clean with white towel or non printed-paper towel and warm water
  4. Mix 1/4-teaspoon mild (non bleach containing) detergent to one cup of warm water
  5. Blot clean with white towel or non printed-paper towel and warm water
Posted by: CS | May, 2009

Spot Removal Tips – Catsup

Follow these steps in order to remove the Catsup spill:

  • In order to prevent the spill from becoming a permanent stain, Act Quickly.
  • Blot any liquids with a clean white towel.  Scrape any solids with a dull spoon.
  • Do Not scrub the carpet.  This may cause damage to the carpet fibers.
  • Pretest any spot removal agent in an inconspicuous area for color transfer or damage.  If color transfer or damage is present, don’t use that solution.
  • Never use any product which contains bleach.
  • Never use any of the spot removal agents in concentrations stronger than those recommended.
  • When using lacquer thinner, nail polish remover, or a dry cleaning solvent, never apply directly to the carpet.  Apply it to a white towel and then blot it on the spill.  Use caution when using these products, and follow the manufacturer instructions.

Steps

Catsup

  1. Blot with white towel or non printed-paper towel to remove excess
  2. Mix 1/4-teaspoon mild (non bleach containing) detergent to one cup of warm water
  3. Apply to spot, rub gently in one direction at a time using white terry towel, or non printed-paper towel
  4. Blot clean with white towel or non printed-paper towel and warm water
  5. Repeat steps 2-4 no more than 3 times as necessary
  6. Mix 1/4 cup white vinegar with 1/2 cup cold water and apply to spot
  7. Blot dry with white towel

Follow these steps in order to remove the Clear Salad Dressing spill:

  • In order to prevent the spill from becoming a permanent stain, Act Quickly.
  • Blot any liquids with a clean white towel.  Scrape any solids with a dull spoon.
  • Do Not scrub the carpet.  This may cause damage to the carpet fibers.
  • Pretest any spot removal agent in an inconspicuous area for color transfer or damage.  If color transfer or damage is present, don’t use that solution.
  • Never use any product which contains bleach.
  • Never use any of the spot removal agents in concentrations stronger than those recommended.
  • When using lacquer thinner, nail polish remover, or a dry cleaning solvent, never apply directly to the carpet.  Apply it to a white towel and then blot it on the spill.  Use caution when using these products, and follow the manufacturer instructions.

Steps

Clear Salad Dressing

  1. Blot with white towel or non printed-paper towel to remove excess
  2. Apply dry cleaning solvent to a white towel, and then blot on spot
  3. Mix 1/4-teaspoon mild (non bleach containing) detergent to one cup of warm water
  4. Apply to spot, rub gently in one direction at a time using white terry towel, or non printed-paper towel
  5. Blot clean with white towel or non printed-paper towel and warm water
Posted by: CS | May, 2009

Spot Removal Tips – Cool Aid

Follow these steps in order to remove the Cool Aid spill:

  • In order to prevent the spill from becoming a permanent stain, Act Quickly.
  • Blot any liquids with a clean white towel.  Scrape any solids with a dull spoon.
  • Do Not scrub the carpet.  This may cause damage to the carpet fibers.
  • Pretest any spot removal agent in an inconspicuous area for color transfer or damage.  If color transfer or damage is present, don’t use that solution.
  • Never use any product which contains bleach.
  • Never use any of the spot removal agents in concentrations stronger than those recommended.
  • When using lacquer thinner, nail polish remover, or a dry cleaning solvent, never apply directly to the carpet.  Apply it to a white towel and then blot it on the spill.  Use caution when using these products, and follow the manufacturer instructions.

Steps

Cool aid

  1. Blot with white towel or non printed-paper towel to remove excess
  2. Mix 1 tablespoon of ammonia with cool water apply to spot
  3. Rinse with warm water
  4. Blot dry with white towel
  5. Mix 1/4-teaspoon mild (non bleach containing) detergent to one cup of warm water
  6. Apply to spot, rub gently in one direction at a time using white terry towel, or non printed-paper towel
  7. Blot clean with white towel and warm water

« Newer Posts - Older Posts »

Categories